Lenovo RackSwitch G8272 Installation Manual page 33

© Copyright Lenovo Corp. 2014
6. Use M6 washers, screws, and clip nuts to attach the filler plate to the rear
mounting brackets. Torque the screws to approximately 5.7 Nm ± 0.1 Nm (50
inch-pounds).
7. Use M3.5 screws to secure the rear brackets to the front brackets. Torque the
screws to approximately 0.5 Nm (4 inch-pounds).
8. If installing the 1U air duct option, see the instruction on
9. Connect all external cables.
10. Initialize the switch. See
11. If the switch is a replacement unit, set Vital Product Data (see
Product Data" on page
8
4
2
10 11
Chapter 4, "Initializing the
49).
Chapter 2: Installing G8272 Hardware and Options
6
9
3
page 34.
G8272," on page 51.
"Configuring Vital
33