Easy Maintenance; Air Cleaner Inspection And Air Cleaner Cleaning&Replacement - KYMCO SPIKE 125 Manual

Spike 125
Table of Contents

Advertisement

9. EASY MAINTENANCE

(1) AIR CLEANER INSPECTION AND AIR CLEANER
CLEANING & REPLACEMENT
Take out the air cleaner and visually check if it is dirty or
clogged.
1.Remove the screws attaching the air cleaner cover and
remove the air cleaner cover.
2.Remove the air cleaner element.
3.The installation sequence is the reverse of removal.
Soak the element in clean engine oil and squeeze out the
excess oil and then install the element and air cleaner.
Replace the air cleaner element at very 4000km.
The air cleaner requires more frequent cleaning or
replacing when ridden in unusually dusty areas. When
replacing, refer to P39 Periodic Inspection & Maintenance
Schedule.
CAUTION:
Be careful not to allow water to enter the air cleaner;
otherwise it may result in hard starting.
If the air cleaner is not installed properly, dust may be
sucked into the cylinder directly to reduce engine
horsepower and affect the service life of engine.
- -
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents