Ubiquiti AG-HP-5G27 Quick Start Manual page 9

9. Re-attach the cable feed door to the Rear Housing. Ensure
the locking tab securely latches to the Rear Housing.
10. Slide the Pole Clamp onto the L-Bracket.
11. Insert the U-Bolt into the Pole Clamp and L-Bracket. Secure
each end of the U-Bolt with a Flange Nut.
Note:
Ø 32 - 56 mm (1.25 - 2.2") pole.
The mounting assembly can accommodate a
9 N · m
(80 lb-in)
7