Ubiquiti AG-HP-5G27 Quick Start Manual page 6

3. Attach the Rear Housing:
a. Ensure the four alignment holes on the Grid Reflector and
L-Bracket are lined up.
b. Orient the Rear Housing with the locking tab of the cable
feed door facing up.
c. Insert the alignment pins of the Rear Housing into the
alignment holes, and push until the Rear Housing locks
into place with a click.
Vertical Polarization
d. Insert the Feed Extender into the Rear Housing with the
Release Button facing down. Push until it locks into place
with a click.
4
Release Button
Horizontal Polarization