Section 2 - Installation
3. Plug the second COVR-P2500 extender into a power socket close to the first extender and wait for the Powerline LED
on both extenders to light up solid green, as shown in the image below.
Note: A solid green Powerline LED indicates optimal signal strength. The LED may light up orange or red if the signal is weaker,
depending on the electrical circuit in your home. The setup process can still be completed with a weaker signal, but it may take
longer.
The COVR-P2502 is now ready to be configured using the web-based user interface, or the free D-Link Wi-Fi mobile app.
Proceed to Completing Setup on page 13 for more information on how to complete the setup process.
D-Link COVR-P2502 User Manual
Manual Installation (continued)
1
2
G
G
1
2
G
G
G
12