Manual Installation - D-Link COVR-P2502 User Manual

Section 2 - Installation
If you do not wish to use the D-Link Wi-Fi app, you can also choose to manually set up the COVR-P2502 and configure your
Covr Wi-Fi network using the web-based user interface. Follow the instructions below for how to set up your COVR-P2502
Hybrid Whole Home Powerline Wi-Fi System.
1. Position one of the COVR-P2500 extenders close to your Internet-connected home router and connect one end of the
included Ethernet cable to a LAN port on the COVR-P2500 and connect the other end to a LAN port on your home
router.
2. Plug the extender into a nearby power socket and wait for the Power, LAN, 2.4 GHz, and 5 GHz LEDs to light up solid
green as shown in the image below.
D-Link COVR-P2502 User Manual

Manual Installation

Router
1
G
1
G
G
11