Connect To A Wireless Client; Wps Button - D-Link COVR-P2502 User Manual

Section 5- Connecting a Wireless Client
The easiest and most secure way to connect your wireless devices to your Covr Wi-Fi network is with WPS (Wi-Fi Protected
Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers, and cameras
will have a WPS button (or a software utility with WPS) that you can press to connect to the COVR-P2500. Please refer to your
user manual for the wireless device you want to connect to make sure you understand how to enable WPS. After your device's
manual, follow the steps below:
Step 1 - Press the WPS button on the COVR-P2500 for about 1 second. The Power LED on the front will start to blink.
Step 2 - Within 120 seconds, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the Power LED stops blinking, you will be connected
and your wireless connection will be encrypted with WPA2.
D-Link COVR-P2502 User Manual

Connect to a Wireless Client

WPS Button

WPS Button
42