Table of Contents
Advertisement
BLUETOOTH AUDIO INSTRUCTIONS
Turn on the Bluetooth on your device.
1. Click or tap on SEARCH DEVICE.
2. Select HUIKANG and your device should now be connected to the treadmill.
3. Wait for the treadmill console to beep to confirm the pairing.
4. Open your favourite music player on your device.
5. Press PLAY/PAUSE to listen to the music or pause at any moment.
6. Press PREVIOUS/VOL- to change to the previous song.
Press and hold it to decrease the volume.
7. Press NEXT/VOL+ to change to the next song.
Press and hold it to increase the volume.
PROGRAMS
Each program is made up of 10 sections of 200m. At each 200m interval the speed/
incline may change. Once the tenth section has been completed the program will loop to
start from section one again unless PAUSE/STOP is pressed.
CUSTOM PROGRAMS
The first 3 programs on the treadmill are customisable which gives you complete
control over your workout. Follow these steps to customise a program:
1. Press PROGRAM and hold for 10 seconds.
2. Press SPEED INCREASE or SPEED DECREASE to set up the speed.
3. Press INCLINE UP or INCLINE DOWN to set up the incline.
4. Press SET to save the first section.
The console will display 2 in the distance section.
5. Repeat this process until you complete all 10 sections.
6. Press SET to save the changes.
HEART-RATE CONTROL PROGRAM
With the treadmill in STANDBY mode and all data displaying ZERO (except WEIGHT):
1. Press the SET button 5 times. The heart-rate will show on the display area.
2. Press SPEED INCREASE or SPEED DECREASE to amend this number.
3. Press the QUICK START button to start or PAUSE/STOP to cancel.
4. Hold the sensor plates on the handrails to obtain the heart-rate reading.
5. The machine will adjust the speed to reach the heart-rate that you set up. If the
heart-rate is lower, the speed will increase. If it's higher, the speed will decrease.
For more details about the treadmill programs, see the Treadmill Program Guide .
20
Hide quick links:
Advertisement
Table of Contents
