T350 Assembly - JLL T350 Instruction Manual

T350 ASSEMBLY

The treadmill has been assembled and tested at the factory, so you shouldn't have any
problems putting all the parts together. Components are designed to fit together, and
only basic tools are required for the assembly process. Inside the box you will find a Tools
Pack (Hex Allen Key, Screwdriver, Washers and Bolts). See previous page.
To assemble your JLL T350 please follow these easy steps:
STEP 1
Attach the vertical frame bars to the
frame. The bolts that are threaded through the frame
will need to be removed beforehand.
NOTE: Ensure that the 2 caps on the vertical
frame bars are facing inwards.
STEP 2
Secure the vertical frame bar to the running deck.
Use 2x flat washers and 2x black Allen head bolts on
both sides of the vertical frame bar. Use 1x arc wash-
ers and the 1x black Allen head bolts on the back of
each vertical frame bar.
STEP 3
Insert the console into the upper end of the vertical
frame bars.
NOTE: You may have to loosen the bolts at the
bottom of the vertical frame to help introduce
the console into the vertical frame bars.
STEP 4
Connect the right hand side wire from the console
and the handrail through the plastic clip provided
until you hear a clicking noise, then push the excess
wire into the handrail frame.
NOTE: Ensure you do not catch the wire between
the console and the frame when reattaching it.
10
running deck