Starting The Treadmill; Stopping The Treadmill; Emergency Dismount; Safety Key Function - JLL T350 Instruction Manual

STARTING THE TREADMILL

Maximum user weight is up to 120 kg, 18.9 St or 265 lb.
1. Switch on the treadmill.
2. Set up your weight to estimate calories burned.
3. Place each of your feet on the side frames located on each side of the running belt.
4. Clip the safety key onto your clothing and carefully test the safety key to ensure
it will activate in case of an emergency. See Safety Key in the Safety chapter for
proper testing of the safety key. Be sure the string is free of knots and has enough
slack for you to run comfortably with the safety key in place.
5. Press QUICK START button.
6. Hold the handrails while you step onto the running belt and begin walking.
7. Press the SPEED INCREASE or SPEED DECREASE buttons to change the treadmill
speed at any time. The left display will show the current speed.
8. Press the PAUSE/STOP button at any time to stop the running belt.
If the safety key is removed during a workout, the drive motor power shuts off
immediately, causing the belt to stop.
When a workout is complete, the belt will slow down until it comes to a stop and a
workout review will show on the display until you press the PAUSE/STOP button. The
treadmill returns to STANDBY mode.

STOPPING THE TREADMILL

Press PAUSE/STOP once to pause the workout session. The treadmill will smoothly
stop and the accumulated data will be displayed. Press PAUSE/STOP again to end the
workout session.

EMERGENCY DISMOUNT

If you experience pain, feel faint or need to stop your treadmill in an emergency
situation, simply pull the safety key off the console. The running belt will then
immediately stop.

SAFETY KEY FUNCTION

The safety key functions as the emergency stop. In an emergency situation, remove the
safety key from the treadmill and the running belt will stop.
18