–
Graphics Turbo IMON Current [ 31 ]
Graphics turbo IMON Current values supported (14-31 ).
–
Primary Display [ Auto ]
Select which of IGFX/PEG/PCI Graphics device should be Primary Display
–
Internal Graphics [ Auto ]
Keep IGD enabled based on the setup options.
–
GTT Size [ 8MB ]
–
Aperture Size [ 256MB ]
–
DVMT Pre-Allocated [ 32M ]
Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the
Internal Graphics Device.
–
DVMT Total Gfx Mem [ 256M ]
Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics
Device.
–
Gfx Low Power Mode [ Enabled ]
Note! This option is applicable for SFF only
–
VDD Enable [ Enabled ]
–
PM Support [ Enabled ]
–
PAVP Enable [ Enabled ]
–
Cdynmax Clamping Enable [ Enabled ]
–
Cd Clock Frequency [ 675 Mhz ]
LCD Control
–
LVDS Panel Type [ Disabled ]
AIMB-285 User Manual
52