Replacing The Auxiliary Light Bulb; Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb - Yamaha XVS1300AF Owner's Manual

Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit. (See
page 7-30.)
2. Remove the auxiliary light bulb
socket (together with the coupler
and bulb) by turning the socket
counterclockwise.
1
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
pulling it out.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU42874
1
1. Auxiliary light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the coupler and bulb) by pushing it
in and turning it clockwise.
6. Install the headlight unit.
7-32
Replacing a turn signal light
bulb or the tail/brake light bulb
1. Remove the lens by removing the
screws.
1. Screw
1. Screw
EAU24285
7