Immobilizer system indicator light
When the key is turned to "OFF" and
30 seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
The electrical circuit of the indicator
light can be checked by turning the key
to "ON". The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
initially when the key is turned to "ON",
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
The self-diagnosis device also detects
problems in the immobilizer system
circuits. (See page 4-8 for an explana-
tion of the self-diagnosis device.)
INSTRUMENT AND CONTROL FUNCTIONS
EAU38626
Multi-function meter unit
1. Speedometer
2. Odometer/tripmeter/fuel reserve tripme-
ter/clock
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
The
multi-function
equipped with the following:
a speedometer
an odometer
two tripmeters (which show the
EAU4290A
a fuel reserve tripmeter (which
a clock
a self-diagnosis device
a brightness control mode
TIP
Be sure to turn the key to "ON" before
using the "SELECT" switch "
and "RESET" switch, except for setting
the brightness control mode.
EWA12423
meter
unit
is
1. "SELECT" switch "
2. "RESET" switch
4-6
distance traveled since they were
last set to zero)
shows the distance traveled on
the fuel reserve)
/
"
4
/
"