Introduction; Thank You; Features; Precautions - IN-COMMAND JRVCS2 Installation And Operation Manual

• INTRODUCTION

• Thank You!

Thank you for choosing a iN-Command product. We hope you will fi nd
the instructions in this owner's manual clear and easy to follow. If you
take a few minutes to look through it, you'll learn how to use all the fea-
tures of your new iN-Command system for maximum enjoyment.

• Features

Features of iN-Command system include:
• Simultaneous control by up to three Android Devices and
one iOS Device
• Control four zones of Interior Lighting
• Control three zones of Exterior Lighting
• Monitor all water and fuel tank levels
• Control and monitor the Water Heater
(switches between LP, AC, or both)
• Control and monitor the Water Pump
• Control and monitor the Generator (including all faults)
• Control Awnings & Awning Lights
• Control Electric and Hydraulic Slides
• Control Jacks (non-automatic function)
• 4 Programmable Auxiliary 12V Triggers
• 4 Alarm Inputs (12V)
• Monitor Battery Voltage with Low Voltage Alert
• Auto Generator Start

• Precautions

• Use the Proper Power Supply.
This product is designed to operate with a 12 volt DC, negative
ground battery system (the standard system in a North American
vehicle).
• Use Authorized Service Centers.
Do not attempt to disassemble or adjust this precision product;
contact a professional for assistance.
• Avoid Moisture.
To reduce the risk of fi re or electric shock, do not expose this
equipment to rain or moisture.
• Avoid Cleaning Products.
The front of this unit should only be cleaned with a slightly damp cloth.
Do not use cleaning products.
• Use Recommended Accessories.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND
ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED
ACCESSORIES.

• Packing List

•
(1) Cover, (2) Thumb Screws
(1) Display Commander (DC)
4
JRVCS2
(1) Body Control Module (BCM)