IN-COMMAND JRVCS2 Installation And Operation Manual page 28

5.3 Press the APP Version "Update" button to update DC
APP.
5.4 Press the Floor Plan "Select" button to select and
load the new fl oor plan.
5.4 Press "OK" to confi rm selection
* If a software update is needed, go to
www.asaelectronics.com/in-command
** The Engineering Passcode is used by the manufacturer for
programming and troubleshooting purposes. Should there be
a software issue, call ASA Electronics Technical Support at
1-877-845-8750 or email them at info@asaelectronics.com.
27
JRVCS2