Set Passcode Timer; Change Passcode; Clear Passcode - IN-COMMAND JRVCS2 Installation And Operation Manual

• Set Passcode Timer

Press the "Set Timer" button to select the idle time to
activate the passcode protection.

• Change Passcode

1. Press the "Change Passcode" button to change to a new
passcode.
2. Enter the new passcode.
3. Confi rm new passcode.

• Clear Passcode

Press the "Clear Passcode" button to clear the passcode.
This will restart the APP, take the user to the End-User License
Agreement, and have the user setup a new passcode.
17
JRVCS2