Auto Generator Start - IN-COMMAND JRVCS2 Installation And Operation Manual

• AUTO GENERATOR START

1. Press the "Auto" button to activate AUTO GEN START.
2. If the battery voltage is less than 11.8 volts for 3 minutes
the system will start the generator.
To ensure the best performance and reliability, only one
air conditioner and minimal 12V devices should be left on
while using the Auto Generator feature.
3. If the generator is started, the system will run the generator for
60 minutes.
4. The system will attempt to start the generator 3 times.
If it fails to start after the third attempt, the system will
turn off the Auto feature and display Check Generator
fault.
31
JRVCS2