Adm-31 Data Display Terminal; Communication Ports - ZiLOG System 8000 User Manual
Zeus operating system manual
Hide thumbs
Also See for System 8000:
- Hardware reference manual (366 pages) ,
- Hardware reference manual (100 pages)
Table of Contents
Advertisement
USER
16
Zilog
USER
Ella~.
This special-purpose key, labeled RUB,
stops
the
execution
of a command before it reaches completion.
After
successfully
stopping
the
command
execution,
the
ZEUS
Operating System responds with a new prompt
(%).
2.2.5
Communication Ports
The S8000 communicates with peripheral devices that are com-
patible
with
an RS-232C interface.
The physical interface
to the eight serial I/O ports, the
par-allel
printer
port,
and
the two terminal expansion ports is with the connectors
located on the rear of the
processor
module.
Figure
2-5
shows the location of the communication ports.
The Winchester disk drive and the cartridge
municate
with their respective controllers
tors located on the rear of
the
processor
modules.
Zilog
tape drive
com-
by using connec-
and
peripheral
16
Advertisement
Table of Contents
