ZiLOG System 8000 User Manual page 37
Zeus operating system manual
Hide thumbs
Also See for System 8000:
- Hardware reference manual (366 pages) ,
- Hardware reference manual (100 pages)
Table of Contents
Advertisement
USER
27
QUIT
Syntax
QUIT
Description
Zilog
USER
The QUIT command is used to enter Transparent Mode from Mon-
itor
Mode.
In
Transparent
Mode, all keyboard inputs and
console outputs are passed between the remote computer
sys-
tem and the S8000.
The console controls the remote computer
system's operating system.
Channels A and
B
of
the
SI02
must
be
set to the same baud rates when operating in Tran-
sparent Node.
The START switch on the S8000 is used to return
to
Honitor
f'lode.
SIO PORT
Syntax
PORT <port addressw> [WIB]
Description
The PORT command is similar to the IOPORT command;
hmqever,
it is used to read data from a Z80l0A MHU.
TEST
Syntax
TEST
Description
The TEST command executes the
S8000
standalone
diagnostic
tests.
Example
~
(CR)
ZBOOT
Syntax
ZBOOT [DIT]
Description
This command is commonly used to manually bootstrap the ZEUS
Operating
System.
The ZBOOT command reads a 5l2-byte pro-
gram from block 0 of the disk or the cartridge
tape
drive.
Generally, there is no return to the Monitor.
Zilog
27
Advertisement
Table of Contents
