Quick Start Guide Gimbal Ring Handle What’s Included 2 x Ring Halves 2 x Stand Legs 2 x Side Handles 1 x Top Handle 1 x Top Handle 1 x Quick Release Adapter Plate 1 x Hex Key CHECKED BY because we’re filmmakers too www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...
Page 2
Installation Instructions Before you start, please make sure you find a leveled flat surface to work on. Using the hex key attach the two stand legs onto one of the ring halves. After tightening the stand legs make sure both legs are flat. Install the quick release adapter and plate between the two stand legs.
Weight 3 lbs Optional Accessories Some other products that work well with the Gimbal Ring Handle available from Ikan include: Beholder 3-Axis Gimbal Stabilizer with Encoders for DSLR and Mirrorless Cameras DS2-A Beholder Angled 3-Axis Gimbal Stabilizer with Encoders for DSLR and Mirrorless Cameras...