Advertisement
Function Set Up 1-4
Guides
Crosshair
Peaking
Underscan
DSLR Scaling
Zooming
Check Field
H / V
Grids
False Color
Zebra
Audio Meters
Waveform
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Toggle between the following: 80%, 90%, 15:9, 4:3, 1.5:1, 2:1, 2.35:1
Submenu Options: Color - White, Red, Green, Blue, Black
Thickness - 1-10
Guide Masks - ON / OFF
Displays a crosshair on the center of the screen
Submenu Options: Color - White, Red, Green, Blue, Black
X Offset - 0-100% (50% is dead center)
Y Offset - 0-100% (50% is dead center)
This monitor is equipped with a color peaking feature which highlights the desired focus area in a bright color.
The operator adjusts the focus until the subject is surrounded with the color outline. The color and thickness of
the line can be adjusted.
Submenu Options: Factor - (line thickness) 1-10
Color - White, Red, Green, Blue, Black
The image size is reduced. This allows the operator to be sure there is no unwanted items in the frame.
Submenu Options: Factor - (Image Size) 50-100
The DSLR Scaling function will aloow the user to extend the DSLR camera's HDMI video output to: Full, 3:2, 16:9
This feature allows the operator to zoom into the image up to 3x
Submenu Options: Position - Middle, L+T (left top), R+T (right top), R+B (right bottom), L+B (left bottom), User
X Offset - Allows the operator to position the image on the X Axis
Y Offset - Allows the operator to position the image on the Y Axis
Ratio - X1.5, X2, X2.5, X3, User
H - Allows the operator to stretch the image horizontally up to 3x
V - Allows the operator to stretch the image vertically up to 3x
Toggles between blue only, red only, green only, & mono modes. This is used to help calibrate the monitor to color bars.
This function displays the blanking portion of the incoming video signal
Activates a grid on the screen to assist with framing. From 4-121 boxes can be displayed on the screen.
Submenu Options: Grids - 1-10
Color - White, Red, Green, Blue, Black
This feature utilizes a full spectrum of assigned color indicators to show overall brightness of the image. This
helps achieve perfect exposure.
Submenu Options: Under Warn. - Allows the user to set the desired IRE level in which the image will show purple
for the under-exposed areas of the image.
Over Warn. - Allows the user to set the desired IRE level in which the image will show red for
the over-exposed areas of the image.
Tooltip - Enables or disables the color code key on the screen.
The monitor will display slanted lines where the image is over-exposed or under-exposed.
Submenu Options: High Area - ON / OFF
Factor - Adjust sensitivity of over-exposure lines
Color - White, Red, Green, Blue, Black
Low Area - ON/OFF
Factor - Adjust sensitivity of under-exposure lines
Color - White, Red, Green, Blue, Black
Allows the operator to monitor up to 8 channels of audio
Submenu Options: Audio Meters - ON / OFF
Audio Channel - 2 Channel, 8 Channel
Position - Top, Bottom, Division (2 Channels on top, 2 Channels on bottom)
Toggles between the different scopes available: Waveform, Vectorscope, RGB Parade, Histogram, Audio Meters
Submenu Options: Waveform - Full screen, Four screen, All types (all scopes on screen at once), User mode,
(custom position and scopes on screen at the same time).
Options - Allows the operator to enable individual scopes and choose options
Blending - 0-100 (Choose opacity of the scopes)
SDI WF Mode - On Screen, Output (choose to display the scopes on the monitor screen or
output them via SDI to a secondary monitor).
because we're filmmakers too
Advertisement
