Advertisement
Configuration of Setting Menus
Guides
Guides
Guide Masks
Crosshair
Grids
Back
Video Configuration
Brightness
Contrast
Chroma
Sharpness
Tint
Color Temperature
Backlight
Aspect
Back
System Configuration
OSD-Language
OSD-Duration
OSD-Transparancy
Menu Setup
DSLR Auto Scaling
System Reset
Flip Control
Fan
SDI 1080p to i Scan
Back
LUT Configuration
Stored from USB
USB Looks
Back
Firmware
Version
Update USB
Back
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Toggle between the following: 80%, 90%, 15:9, 4:3, 1.5:1, 2:1, 2.35:1, Custom
Enables or disables masking for the guides
Activates crosshair on the center of the screen
Displays grids on the screen to assist with framing
Return to previous menu
0-100
0-100
0-100
0-100
0-100
5600K, 6500K, 7500K, 9300K, Custom
Low, Middle High
Full, 16:9, 15:9, 4:3, 1.5:1, 1.85:1, 2:1, 2.35:1, User
Return to Previous Menu
English, Chinese
5 Seconds, 10 Seconds, 15 Seconds, 20 Seconds, 30 Seconds, OFF
Off, Low, Middle, High
Allows up to 5 users to save menu settings
Automatically activates DSLR scaling when using a DSLR
Returns all settings back to default
Flips the image horizontally, vertically, or both
Controls the operation of the dual cooling fans. The fans should always be turned on when using the high setting
for the backlight.
Converts progressive SDI output signal to interlaced
Return to previous menu
List of LUT files that have been saved from the USB drive. This allows for quick access to your most used LUT's
Allows access to LUT files saved on a connected USB drive. Use scroll wheel to navigate file system. When you find
the LUT you want to load just simply press the scroll wheel down and the file will be loaded. Press the scroll wheel
a second time and the LUT will be stored on the monitor and accessible via the "Stored from USB" menu option
Return to previous menu
Displays firmware version
Used to update the monitor firmware. Firmware should be saved in the root directory of a USB drive for the monitor
to recognize it. Check www.ikancorp.com for the latest firmware.
Return to previous menu
because we're filmmakers too
Advertisement
