Alcatel-Lucent ALU-Dm 744-I Manual page 20

1 Introduction
Ppp2 config>ppp
-- PPP Configuration --
ppp2 PPP config>authentication chap
ppp2 PPP config>dial-routing-pool RDSI
ppp2 PPP config>exit
ppp2 config>exit
Config>network ppp3
-- Generic PPP User Configuration --
ppp3 config>ppp
-- PPP Configuration --
ppp3 PPP config>authentication chap
ppp3 PPP config>dial-routing-pool RTC
ppp3 PPP config>exit
ppp3 config>exit
Config>network ppp4
-- Generic PPP User Configuration --
ppp4 config>ppp
-- PPP Configuration --
ppp4 PPP config>authentication chap
ppp4 PPP config>dial-routing-pool RTC
ppp4 PPP config>exit
ppp4 config>exit
With this last step two types of PPP connections have been configured, one for the ISDN connections, which request
CHAP authentication, accept users corresponding to branches 1, 2 and 3, is a member of the ISDN Dial Routing
pool and authenticates with the "central" user. The second one is for PSTN connections which request CHAP au-
thentication, accepts users corresponding to branches 4 and 5, is a member of the PSTN Dial Routing pool and au-
thenticates with the "central" user.
The following list displays the device global configuration in text mode after these configuration adjustments have
been made.
Config>show config
; Showing System Configuration for access-level 15 ...
; OA5058 Router
log-command-errors
no configuration
add device ppp 1
add device ppp 2
add device ppp 3
add device ppp 4
add device dial-routing 1
add device dial-routing 2
set data-link at serial0/0
set data-link at serial0/1
set data-link x25 serial0/2
global-profiles dial
; -- Dial Profiles Configuration --
profile DIALROUTING default
profile DIALROUTING inout
profile DIALROUTING idle-time 70
;
exit
;
;
;
network ethernet0/0
; -- Ethernet Interface User Configuration --
no ip address
;
exit
16
Alcatel-Lucent Enterprise
Dial Routing