Table of Contents
Advertisement
Alcatel-Lucent Enterprise
Links status
------------
PPP Interface
---------------
ppp1
ppp2
Connections status
------------------
Connection Id
-------------
1
DR monitor+
3.1.2.2 Connection Status
To list the status of the Dial Routing connections in an interface, use the following command:
Syntax:
DR monitor+list connections
Example:
DR monitor+list connections
Connections status
------------------
Connection Id
-------------
1
DR monitor+
A list is displayed with an entry for each connection profile where you can see the identifier, the destination telephone
number, the user name and if this is being used by a link or not.
3.1.2.3 Link information
To list the state of the PPP interfaces that participate in the Dial Routing process directed by this interface, use the
following command:
Syntax:
DR monitor+list links
Example:
DR monitor+list links
Links status
------------
PPP Interface
---------------
ppp1
ppp2
DR monitor+
This list contains an entry for each PPP interface that can be used by this Dial Route interface to carry out a connec-
tion. The Status field indicates if the interface is active or available. In cases where it is active, the Connection ID
field indicates the identifier of the connection you are using.
In cases where the link list contains less interfaces than expected, check the pool name configuration both in the Dial
Routing interface and the PPP interfaces.
3.1.3 Return to the previous menu
The EXIT command exits the interface monitoring menu.
Syntax:
DR monitor+exit
Example:
Dial Routing
Status
-----------------------
IDLE
IDLE
Destination address
Username
--------------------
--------------------------------
918076565
USUARIO1@sample
Destination address
Username
--------------------
--------------------------------
918076565
USUARIO1@sample
Status
-----------------------
IDLE
IDLE
Connection ID
-------------
Connection ID
-------------
Status
--------
INACTIVE
Status
--------
INACTIVE
3 Monitoring
37
Advertisement
Table of Contents
