How To Install The Battery Of Remote Controller; Remote Cotroller Signal Connection; Throttle Mode Switch - MJX R/C Bugs 2 User Manual

How To Install The Battery Of Remote Controller

Unscrew counter clockwise to open the battery compartment cover, install 4x AA batteries into the
battery compartment according to the given polarity, screw clockwise to close the battery compartment.
●Insert batteries with correct polarity.
!
●Non rechargeable batteries are not to be charged; the transmitter need 4 X AA batteries for
work.
●Do not mix old and new batteries.
●Do not mix alkaline,standard(carbon-zinc),or rechargeable(nickel-cadmium) batteries.
●Rechargeable batteries are to be removed from the toy before being charged;
●Rechargeable batteries are only to be charged under adult supervision;
●Exhausted batteries are to be removed from the toy;
●The supply terminals are not to be short-circuited.
Remote Controller Signal Connection
Press the red button on top of the remote controller and turn on the power of the remote controller. The
remote controller will send out 2 beep sounds, and the indicator lights keep flashing, the remote
controller is under signal connection status.
Attention: When the remote controller is under signal connection status, please keep your
!

Throttle Mode Switch

Left hand throttle and right hand throttle are available for option at the remote controller. User can
choose different control stick mode as per operation habit. There are 4 stick modes that could be found
as below:
hands away from the remote controller. If any operation is done, the remote
controller will exit signal connection that will result in signal connection failure.
A B A B
Model
-4- -5-