Aircraft Status Indicator; Link Your Aircraft To The Remote Controller - MJX R/C Bugs 2 User Manual

How to remove the battery
Put your thumb and index finger on the designated position and press with appropriate force and pull
backward. The battery will be removed. To avoid slipping, please keep your finger and your aircraft dry
and clean.

Aircraft Status Indicator

NO.
Front and rear lights flash light green rapidly
1
Front and rear lights flash red, light green and
2
Front light glows solid red, rear
3
light glows solid light green
Front light glows solid red, rear
4
light glows solid green
Front and rear lights flash green rapidly
5
Front and rear lights flash light green alternatively
6
Front and rear lights flash green alternatively
7
Front light glows solid red, rear light
8
Front light glows solid red, rear light
9
Front and rear lights flash once, stop
10
Front and rear lights flash twice, stop
11
Front and rear lights flash three times, stop
12
Front and rear lights flash fourth times, stop
13

Link Your Aircraft To The Remote Controller

When the remote controller is in signal connection status, power on your aircraft. After a beep sound,
signal icon is shown on the LCD screen. It means that the aircraft has successfully linked to the
remote controller.
● Signal connection is done once for all if the remote control is not linked to other aircraft.
!
● Set the connection one by one to avoid signal connection error.
Indicator Status
green alternatively
flashes red slowly
flashes red rapidly
for 1.5 second
for 1.5 second
for 1.5 second
for 1.5 second
Aircraft 2.4GHz disconnected
Aircraft is in initialization detection status
No GPS signal, aircraft is in gesture mode
Good GPS signal, aircraft is preparing
Aircraft is in gyroscope calibration status
Aircraft is in Compass Horizontal Calibration
Aircraft is in Compass Vertical Calibration
Aircraft is nearly low voltage, 1/4
Aircraft is in low voltage, only 1/6
Something wrong in gyroscope
Something wrong in barometer
Something wrong in compass
Something wrong in the GPS module
-11-
-12-
Meanings
for GPS mode
battery level left.
voltage left.