Signal Strength Indicator
Signal strength icon
Prepare The Flight
Before You Take Off, Check And Make Sure That
1.The aircraft and the remote controller are full charged.
2.The propellers are installed correctly.
3.The motors work normally after unlocking.
Flight Steps
1. Link the remote controller with the aircraft.
2. Aircraft initialization detection.
3.Aircraft Compass Calibration.
4.Unlock the aircraft.
5.Pull upward the throttle stick and the aircraft takes off. Control the aircraft's flying gesture by the left
and the right control stick.
6.Pull the throttle stick to bottom position and the aircraft lands to the ground and locks the motor
automatically.
7.Take out the battery from battery comparment of the aircraft.
Product Components
Basic Parts
Upper Cover
B2C001
shows the strength of the received signal. The more, the better.
Lower Cover
B2C002
Model
Propeller A/B
B2C003
-17-
Lamp cover of the
front and rear light
B2C004