Remote Controller Status Indicator; Major Parts Of The Aircraft - MJX R/C Bugs 2 User Manual

Remote Controller Status Indicator

Remote Controller Status
NO.
Indicator lights flash quickly.
1
Indicator lights flash slowly with steady beep..
beep sound and the battery legend "
2
LCD display flashing.
Battery legend "
3
shown, with steady beep..beep...beep sound.
Battery legend "
4
shown, with steady long beep sound.
Signal legend on LCD display is less than
two grids or no displaying, with steady beep...
5
beep...beep sound.

Major Parts Of the Aircraft

[1]
[4]
[5]
" on LCD display is as
" on LCD display is as
MADE INCHINA
The remote controller is under signal connection
status.
"on The remote controller is in low voltage status.
Battery is running out "
when the altitude is over 100m or the distance is
over 300m.
Battery is low "
the altitude is over 15m or the distance is over
15m, or land immediately.
1.The distance between aircraft and remote
controller is so long that the signal is weak.
2.The battery is removed nearly after the aircraft
connects to the remote controller.
-8- -7-
Operation
" ; the aircraft will return
" ; the aircraft will return when
Brushless motor
[1]
[2]
Propeller
[2]
Camera
[3]
[3]
[6]
TF Card Slot
[4]
Battery compartment
[5]
Front indicator light
[6]
[7]
Battery
[7]
Rear indicator light
[8]
[8]