Return-To-Home(Rth); Smart Rth; Failsafe Return - MJX R/C Bugs 2 User Manual

Return-To-Home(RTH)

The Return-to-Home(RTH) procedure brings the aircraft back to the last recorded Home
Point. There are 3 types of RTH procedures: smart RTH, failsafe RTH and low battery RTH.
The following sections describe them in detail.
Home Point

Smart RTH:

If the GPS signal is available( more than 7 satellites is presented) and the home point is recorded
previously, press this button, the aircraft will fly back to the home point.During the smart RTH, you
can use the remote controller to guide the aircraft around obstables. You can press the RTH button
again to exit RTH procedure and regain the control of the aircraft.

Failsafe Return

If the GPS signal is available( more than 7 satellites is presented)) and the home point is recorded
previously. Failsafe RTH will be triggered if the remote controller signal is lost for more than 6
seconds, the fly control system will control the aircraft automatically and the aircraft will fly back to
the last recorded Home Point.You can regain control of the aircraft by press the RTH button if the
remote controller signal is recovered.
!
GPS
● During the Failsafe Return procedure, the aircraft can not avoid obstacles.
● The aircraft cannot Return-to-Home if the GPS signal is weak( satellites number is
less than 7).
● If there is no GPS signal and remote controller signal lost for more than 6
seconds, the aircraft will not Return-to-Home but descend slowly until land to the
ground and lock the aircraft.
The Home Point is the location at which the aircraft
takes off. A strong GPS Signal must be presented
for the aircraft to record the Home Point.
Model
-15-
Description