Battery Installation - MJX R/C Bugs 2 User Manual

Attention: Please install all fittings step by step as below plctures. Keep in mind that the
!
Screw with dot
Step 3
Silicone rubber ring
Step 2
A A
Propeller A (clockwise)
Step 1
Clockwise rotating
motor is marked
with white dot.
● Please make sure that the clockwise and the counter clockwise propellers are installed
!
on the correct motors, because the aircraft will not fly normally for wrong propellers
installation.
● Be careful when installing the propellers, as they are a little sharp.
● Please use MJX propellers for this aircraft.
● Extra propellers can be ordered additionally.

Battery installation

Slide the battery into the battery compartment at the rear of the aircraft by pushing with appropriate
force. Make sure that you hear a click sound indicating the battery is firmly installed. At the moment,
push the battery again to double confirm that the battery is installed firmly.
Attention: The battery should be installed firmly, failure to do so may affect the flight saftely
!
propellers are distinguished by A & B mark and propellers screws are distinguished
by dot mark.please pay attention to your rotation direction.
Screw without dot
Step 3
Silicone rubber ring
Step 2
Propeller B (Counter-clockwise)
Step 1
Counter-clockwise
rotating motor is
marked with black dot.
of your aircraft. The aircraft may crash due to power-cut during the flight.
B B
-10- -11-
Propeller changing tool
Front
A
A B
B A
B
Rear
B
A