Return To Home (Rth) Operation - MJX R/C X103W User Manual

2k, 5g wifi
Table of Contents

Advertisement

Return to Home (RTH) Operation

The Return-to-Home(RTH) procedure brings the drone back to the last recorded Home Position. There
are 3 types of RTH modes: Smart RTH, Low battery RTH and Fail safe RTH. The following sections
describe each mode in detail.
Home Position
● Drone can not avoid obstacles when it is flying back with the RTH function
!
initiated.
● Drone can not return to the Home Position when the GPS signal is weak or
unavailable.
● Drone will stop ascending and immediately return to the Home Position if
user moves the throttle stick in the drone reaches 15meter (50 feet) altitudes
or beyond during Smart RTH.
● If there is no GPS signal and the remote controller signal lost for more than 6
seconds, the drone can not Return-to-Home but descend slowly until land to
the ground and lock the drone.
Smart RTH
Use the RTH
button on the remote controller or tap the RTH button in the "MJX GPS" APP and follow
the on-screen instructions when GPS (more than 7 satellites is presented) is available to initiate Smart
RTH. During the smart RTH, you can use the remote controller to guide the drone around obstacles.
You can press the RTH button again to exit RTH procedure and regain control of the drone.
Low battery RTH
The low battery level Fail safe is triggered when the MJX intelligent battery is depleted to a position that
may affect the safe return of the drone. Users are advised to return home or land the drone immediately
when prompted.
1. When the drone rear lights flash slowly, battery icon "
"MJX GPS" APP. And steady "beep beep beep... beep beep beep" sound is heard. At this moment,
the drone will automatically return to the Home Position if the flying altitude is beyond 30 meters (100
feet) or the flying distance against the home position is beyond 50 meters (150 feet).
2. When the drone rear lights flash slowly, battery icon "
the "MJX GPS" APP. And steady "beep..beep...beep" sound is heard. At this moment, the drone
will automatically return to the Home Position if the flying altitude is beyond 15 meters or the flying
distance against the home position is beyond 15 meters. If the drone flying altitude is less than 15
meters or the flying distance is less than 15 meters, the drone will automatically land to the ground.
GPS
If a strong GPS signal (satellites over 7) was acquired before takeoff,
the Home Position is the location from which the drone launched. The
GPS signal strength is indicated by the GPS icon (
rear indicator lights will blink rapidly from yellow color to green color
when the home position is recorded.
Description
" is shown on the remote controller or on the
" is shown on the remote controller or on
-7-
X103W User Manual
). The drone

Advertisement

Table of Contents
loading

Table of Contents