Avaya 8600 Technical Manual page 25

Peer LDP ID & Verify the Peer LDP ID is that for the direct neighbors. In the case of 8600-1 which is
Interface & connected to MPLS P router P1 and P2, the Peer LDP ID should show up as
State 10.100.100.1 via interface VLAN 1000 and 10.100.100.3 via interface VLAN 1010. The
State should also be Operational.
2.2.4.4 MPLS LDP Path
Step 1 – Verify that the LDP labels used by issuing the following command:
ERS8600-1:5# show mpls ldp bindings
PPCLI: ERS8600:5# show mpls ldp path
Result:
Fec : 10.10.50.0/24
Remote Binding : 10.100.100.3:0 ; Label : 23(inactive)
Fec : 10.10.60.0/24
Remote Binding : 10.100.100.3:0 ; Label : 24(inactive)
Fec : 115.0.103.0/24
Remote Binding : 10.100.100.3:0 ; Label : 3(inactive)
Fec : 222.1.7.0/24
Remote Binding : 10.100.100.3:0 ; Label : 3(inactive)
Fec : 10.91.100.0/30
Remote Binding : 10.100.100.3:0 ; Label : 21(inactive)
Fec : 10.91.100.4/30
Remote Binding : 10.100.100.3:0 ; Label : 3(inactive)
Fec : 10.92.101.0/30
Local Binding : Label:21
Remote Binding : 10.100.100.3:0 ; Label : 19(active)
Fec : 10.93.102.0/30
Remote Binding : 10.100.100.3:0 ; Label : 20(inactive)
Fec : 10.100.3.0/30
July 2010
10.100.100.1:0 ; Label : 100096(inactive)
IV-VPN (MPLS) for ERS 8600 Technical Configuration Guide
avaya.com
25