Avaya 8600 Technical Manual page 22

ERS8600-1: Step 3 – Enable MPLS LDP state globally
ERS8600-1:5(config)# mpls ldp
ERS8600-2: Step 3 – Enable MPLS LDP state globally
ERS8600-2:5# config mpls ldp state enable
ERS8600-3: Step 3 – Enable MPLS LDP state globally
ERS8600-3:5# config mpls ldp state enable
2.2.4 Verify LDP Operations
The following is in reference to ERS8600-1 using ACLI. Where different, the PPCLI equivalent is shown.
2.2.4.1 MPLS LDP State
Step 1 – Verify that the LDP state
ERS8600-1:5# show mpls ldp
PPCLI: ERS8600:5# show mpls ldp info
Result:
State
Penultimate Hop Pop
Hello Hold Time
Session Keep Alive
Loop Detect Hop Count Limit
Loop Detect Path Vector Limit: disabled
Redist-connected
Session Status Traps
Session Threshold Traps
Path Vector Limit Traps
On each ERS8600 in the switch cluster verify the following information:
Option Verify
State Verify that the LDP state is Enabled.
2.2.4.2 Verify LDP ID
Step 1 – Verify LDP Id
ERS8600-1:5# show mpls ldp summary
July 2010
: enabled
: implicit-null
: 15
: 40
: disabled
: disabled
: disabled
: disabled
: disabled
IV-VPN (MPLS) for ERS 8600 Technical Configuration Guide
avaya.com
22