Avaya 8600 Technical Manual page 18

2.2.1.3 Enable OSPF
ERS8600-1: Step 1 – Enable OSPF on VLAN 1000 and 1010
ERS8600-1:5(config)# interface vlan 1000
ERS8600-1:5(config-if)# ip ospf enable
ERS8600-1:5(config-if)# exit
ERS8600-1:5(config)# interface vlan 1010
ERS8600-1:5(config-if)# ip ospf enable
ERS8600-1:5(config-if)# exit
ERS8600-2: Step 1 – Enable OSPF on VLAN 1010
ERS8600-2:5# config vlan 1010 ip ospf enable
ERS8600-3: Step 1 – Enable OSPF on VLAN 1020
ERS8600-3:5# config vlan 1020 ip ospf enable
2.2.1.4 Disable Spanning Tree on VLAN Port Members
ERS8600-1: Step 1 – Disable STP on port 4/19 and disable/re-enable port 3/15 and 4/1
ERS8600-1:5(config)# interface gigabitEthernet 3/15,4/1
ERS8600-1:5(config-if)# no spanning-tree stp 1
ERS8600-1:5(config-if)# shutdown
ERS8600-1:5(config-if)# no shutdown
ERS8600-1:5(config-if)# exit
ERS8600-2: Step 1 – Disable STP on port 4/19 and disable/re-enable port 4/19
ERS8600-2:5# config ethernet 4/19 stg 1 stp disable
ERS8600-2:5# config ethernet 4/19 state disable
ERS8600-2:5# config ethernet 4/19 state enable
ERS8600-3: Step 1 – Disable STP on port 3/27 and disable/re-enable port 3/27
ERS8600-3:5# config ethernet 3/27 stg 1 stp disable
ERS8600-3:5# config ethernet 3/27 state disable
ERS8600-3:5# config ethernet 3/27 state enable
July 2010
IV-VPN (MPLS) for ERS 8600 Technical Configuration Guide
avaya.com
18