Avaya 8600 Technical Manual page 23

Ethernet routing switch
Hide thumbs Also See for 8600:
Table of Contents

Advertisement

Result:
Local Ldp Id
Routes
Interface Adjacencies
Extended Adjacencies
Sessions
Label Switched Paths
Programmed In-segments : 9
Programmed Out-segments: 5
Redist-connected
On each ERS8600 in the switch cluster verify the following information:
Option
Verify
Local Ldp Id
Verify that the LDP is the CLIP address configured on the switch. For the 8600-1 switch,
the LDP ID should be displayed as 10.91.1.1.
2.2.4.3
Verify LDP Interface, Session, Discovery, and Neighbors
Step 1 – Verify LDP interface
ERS8600-1:5# show mpls ldp interface
Result:
Local LDP Id :
Interface :
Nbr Count : 1
Hello Interval : 5 ; Next Hello : 1
Interface :
Nbr Count : 1
Hello Interval : 5 ; Next Hello : 3
Step 2 – Verify LDP session
ERS8600-1:5# show mpls ldp session
Result:
Local LDP ID : 10.91.1.1:0
Peer LDP ID :
Hold Time : 30 ; Hold Time Remaining : 21
Peer LDP ID :
Hold Time : 40 ; Hold Time Remaining : 35
July 2010
:
10.91.1.1:0
: 18
: 2
: 0
: 2
: 14
: disabled
10.91.1.1:0
Vlan 1000
; State :
Up
Vlan 1010
; State :
Up
10.100.100.1:0
; State :
10.100.100.3:0
; State :
IV-VPN (MPLS) for ERS 8600 Technical Configuration Guide
Operational
Operational
avaya.com
23

Advertisement

Table of Contents
loading

Table of Contents