Electrical Characteristics; Interfaces; Printing Speed - TallyGenicom LMPPLS Administrator's Manual

Electrical Characteristics

Printer
Configuration
Type
Cabinet 6805Q
Cabinet 6810Q
Cabinet 6815Q
Cabinet 6820Q
Pedestal 6805
Pedestal 6810
Zero Tear 6805Z
Pedestal
Zero Tear 6810Z
Pedestal
The above values are calculated while printing 136 column, all upper case high speed "E's". The stand by
(Energy Saver mode) wattage is 5W (17 BTU/Hr) for all models.

Interfaces

Type:
Logic Levels:
Transfer Rates:

Printing Speed

The printing speed of text is measured in lines per minute (lpm) and is a function of the selected font and
the vertical dot density. Printing speed is independent of the number of characters configured in the
character set repertoire. Print rates for lines containing attributes such as bold or emphasized printing,
superscripts, subscripts, or elongated attributes will decrease to not less than half the rates of the font
without such attributes. The exact print rate of lines containing these attributes depends on the specific
print job, but software maximizes the throughput by dynamically determining which dot rows contain
adjacent dots and must be printed in two strokes.
Voltage (+/-
10%)
AC 100-240V
AC 100-240V
AC 100-240V
AC 100-240V
AC 100-240V
AC 100-240V
AC 100-240V
AC 100-240V
Standard: USB 2.0 Universal Serial
Bus RS-232 serial
Optional: IEEE 1284 Parallel
Centronics Parallel
Ethernet 10/100Base-T
TTL/EIA
Up to 200 Kilobytes on parallel interface.
Up to 115.2K baud on RS-232 serial interface.
Freq (+/-
Amps
10%)
50/60 Hz 5A
50/60 Hz 5A
50/60 Hz 9A
50/60 Hz 9A
50/60 Hz 5A
50/60 Hz 5A
50/60 Hz 5A
50/60 Hz 5A
®
-232E/EIA-422B
Watts BTU/Hr
320W 1093
320W 1093
475W 1622
475W 1622
320W 1093
320W 1093
320W 1093
320W 1093
145