System Installation Overview - Cisco SCE 8000 Installation Manual

System Installation Overview

Figure 1 shows the order of in which the Cisco Service Control solution must be installed.
Figure 1 Installing the Complete Cisco Service Control Solution
Network
management
Collection
Manager
CLI and
3
SNMP
RDRs
To install the complete Cisco Service Control solution, complete these steps:
Step 1 Install the Cisco SCE platform (see the
This task includes:
• Installation in the rack
• Initial configuration by using a local console
• Cabling management and line ports
Install the Subscriber Manager (see the
Step 2
This task includes:
• Preliminary configuration (memory settings and configuration file.)
• Installing the SCMS Subscriber Manager software
• Adding a user for Proprietary Remote Procedure Call (PRPC) authentication
Install the Collection Manager (see the
Step 3
This task includes:
• Installing the SCMS Collection Manager software
• Configuration related to the various adapters
• Adding a user for PRPC authentication
• Configuring the SCMS Collection Manager to be able to connect to the database
Install the Cisco SCA BB Console and optional Cisco SCA BB configuration utilities (see the
Step 4
BB Application" section on page
4
SCA BB application
Service policy and
quota management
4
XML/RPC
Subscriber info
1
PWR A
PWR B STATUS
MNG 1 BYPASS Cisco SCE
MNG 2 CONSOLE 2000
LINK/ AUX LINK RX 4xGB E Series
ACTIVE 10/100/ 1000 ACTIVE LINK/ 10/100/ TX LINK RX
1000 TX LINK RX
TX
RX MM LINK RX TX
TX RX
MM TX RX
MM TX
GBE-1 RX MM TX
SUB
LINE NET GBE-2
SUB LINE/CASCA
DE NET
SCE platform
"Installing the Cisco SCE 8000 Platform" section on page
"Installing the Subscriber Manager" section on page
"Installing the Collection Manager" section on page
18).
Subscriber
Manager
2
11).
13).
15).
"Installing the Cisco SCA