Installing The Collection Manager; Ports Used By The Collection Manager Software - Cisco SCE 8000 Installation Manual

Add a user for PRPC authentication.
Step 8
It is necessary to add a user for PRPC authentication because Cisco SCA BB requires a username and password when
connecting to the Subscriber Manager.
To add a user for PRPC authentication, use the p3rpc command-line utility. For example:
>p3rpc --set-user --username=pcube --password=pcube-password

Installing the Collection Manager

This section describes how to install the Collection Manager, on a computer running Red Hat Linux:
Ports Used by the Collection Manager Software, page 15
•
Installing the Sybase Database, page 16
•
Installing Collection Manager Software, page 16
•
For more information, see the Cisco Service Control Management Suite Collection Manager User Guide.

Ports Used by the Collection Manager Software

Table 7 describes the TCP/UDP ports on which the Collection Manager software and associated components listen. This table
helps the network administrator understand the behavior of the software and its adherence to the security policy.
Table 7 Ports that the Collection Manager Listens on Constantly
Port Number
33000
21
33001
9092
1099—1120
22000
7787
14375
33002
2055
9093
14376
The ports that are listed are those ports on which the device listens constantly. Allow access on these port numbers; otherwise,
certain operations may fail.
Some operations (such as file transfer) cause a device to open ports, other than those listed, temporarily; however, these ports
close automatically after the operation ends.
Description
Used by the Cisco SCE devices to send RDRs for data collection.
Used by the legacy (releases earlier than 3.0) SCAS Reporter to authenticate against the Collection
Manager user on the Collection manager machine.
Internal collection manager.
Note Access is required only from the local machine; external access can be blocked.
HTTP technician interface.
RMI. Used as the management interface between the data collector and the Service Control
management server.
FTP server of the Collection Manager.
FTP transactions may listen on other ports (22001 to 22100) for data transfer, as negotiated
Note
by the protocol.
Internal logging of the management user log.
Note Access is required only from the local machine; external access can be blocked.
Used by the Cisco SCA BB Console to send symbol definitions (values.ini) to the
Collection Manager.
Internal Collection Manager for Cisco IOS Flexible NetFlow.
The UDP port used by the Cisco ASR 1000 router to send Cisco ASR 1000 Flexible NetFlow records
for data collection.
HTTP technician interface for Cisco IOS Flexible NetFlow.
Used by PRPC.
15