Parts Ordering; Parts List - Emerson Fisher V150S Slurry Vee-Ball Instruction Manual

V150S Slurry Vee-Ball Valve
July 2017

Parts Ordering

A serial number is assigned to each valve and stamped on the nameplate. Always refer to the valve serial number when
corresponding with your
When ordering replacement parts, also specify the complete 11‐character part number from the parts kits.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.

Parts List

Note
Contact your Emerson sales office or Local Business Partner for Part
Ordering information.
Common Parts (figures 9 and 10)
Key Description
1 If you need a valve body as a replacement part,
order by valve size, serial number, and desired
valve body material.
2* Valve Body Liner, High Chrome Iron
3* V‐notch Ball
4* Flow Ring, High Chrome Iron
5 Flow Ring Retainer
6* Bearing Shroud, High Chrome Iron (2 req'd)
7* Bearing, 440C (2 req'd)
8 Drive Shaft Spline
8 Drive Shaft, DD
9 Follower Shaft
10* Shaft Pin, carbon steel, zinc plated (2 req'd)
14
Emerson sales office or Local Business Partner regarding spare parts or technical information.
Key Description
13* Gasket, graphite/laminate
14* Packing Box Ring, 316 SST
15* Packing Set
16 Packing Follower
17 Stud (2 req'd)
18 Nut (2 req'd)
19 Spring
20 Plug
21* Gasket, graphite/laminate
22 Retainer Screw (2 req'd)
23 Retainer Clip (2 req'd)
24 Actuator Mounting Screw (4 req'd)
25 Nameplate
26 Drive Screw (4 req'd)
27 Flow Arrow
28 Flow Ring Insert type, High Chrome Iron
29 Flow Ring Insert PSZ Ceramic
130 Clamp
131 Bearing Clamp Assembly
*Recommended spare parts
Instruction Manual
D103164X012