Table of Contents
Advertisement
1. Space the two keyhole openings
(6) in the wall where you would like
to mount the Cinebar Duett at a
distance of 64.3 cm apart. Use a
ruler, pencil and spirit level for this.
2. Use a metal detector to check the
drill areas. If necessary, select
another area for mounting.
3. Use a 5 mm rock drill to drill holes,
which are approx. 40 mm deep, at
the marked positions.
4. Insert 2 dowels (ø 5 mm) all the
way in the drill holes.
5. Screw one screw (4 x 45 mm) into
each dowel until there is approx.
15 mm of space between the wall
and the screw head.
Connecting
CAUTION
Risk of injury/damage!
– Lay the cables so that
they do not pose a tripping
hazard.
Three red rubber loops are located
on the back of the Cinebar Duett. Pull
the connector cord through these
loops so that they don't hang around
loose.
14
• Cinebar Duett
(6)
6. Press the Cinebar Duett up against
the wall so that the screws vanish
in the keyhole openings (6).
7. Now pull the Cinebar Duett down
so that the screws slip into the
small slot.
8. If applicable, screw the screws
further in or out until the
Cinebar Duett is securely mounted
on the wall.
TV set
If your TV is equipped with an ARC
capable HDMI jack, connect it via the
HDMI TV jack (11). You will need an
ARC capable HDMI cable for this.
The ARC (audio return channel) HDMI
function plays the television audio via
HDMI. With some TV sets, this func-
tion must be activated in the menu
and in most cases, only one HDMI
connection is ARC capable (see the
user manual for the TV set).
Advertisement
Table of Contents
