Table of Contents
Advertisement
CEC
This option allows you to switch the
HDMI function CEC on and off.
With CEC, you can control the Cinebar
Duett with the remote control of
the TV set via the HDMI connection
(activation and deactivation, adjust-
ment of the volume, automatic switch
between sources). For this, the TV set
must support CEC.
SUB PAIR
You can operate the Cinebar Duett
with a compatible wireless
subwoofer. For this, pair the devices:
1. Select this menu item and push
the OK button (32).
The notice "PAIRING" appears
in the text field (13) – now, the
Cinebar Duett will scan for a
wireless subwoofer for approx. 60
seconds.
2. On your wireless subwoofer, start
the process to establish a connec-
tion with its "Pairing" button (see
the corresponding user manual).
– The connection will have been
established after a short time and
the message "CONNECTED" will
briefly appear in the text field.
– If "TIME OUT" appears instead, no
connection has been established.
Repeat the process.
20
• Cinebar Duett
RESET
This clears all modified settings:
• Push the button (16)/(20).
The text field will switch from
"RESET NO" to "RESET YES".
• Push the MENU button (19) to
cancel.
• Push the OK/INFO button (33) to
clear.
The Cinebar Duett will switch to
standby mode. Once you have
switched the device on again, the
default settings will be restored.
SW (software version)
Based on the version shown here
(e.g. "v28"), you can determine
whether new system software is
available on our website
www.teufelaudio.com/software-up-
dates.html (see „Software Update" on
page 23).
Advertisement
Table of Contents
