In case of complaint we will need the following infor- prior notice and in no way constitutes any liability on mation to process your enquiry: the part of Lautsprecher Teufel GmbH. 1. Invoice Number No part of these instructions may be reproduced in...
• Place the device so that no ventilation holes are blocked. • The standby button does not disconnect the unit from the power supply. For this reason, connect • Cinebar 11...
Page 5
• Do not expose batteries and storage batteries to • When storing the product, also ensure that it direct sunlight. stands safely and that it cannot be knocked down or over. • Cinebar 11...
Control elements and connections Cinebar 11 top and front AUDIO Item Name Description AUDIO IN 3,5 mm input jack (analogue) Select source (HDMI, TV HDMI, OPTI- SOURCE CAL, ANALOG, BT AU) VOL –/+ Adjust volume Switch the device on or to standby...
Page 8
Activate and deactivate night sound NIGHT effects Item Name Description Wireless connection LED PAIRING STATUS POWER Power control LED Switch the Subwoofer on or to POWER / STANDBY standby Wireless pairing PAIRING Input jack for power cord • Cinebar 11...
• Do not place any heavy objects on top of the ca- bles or the units. 6. Push the Cinebar 11 up against the wall so that the Wall mounting screws disappear into the holes (6). Now pull the...
This connection example only provides a few possibilities for connecting the de- vice. There are often different connecting methods possible for a device. Please consult the operating instructions of the respective device for more information in this regard. • Cinebar 11...
• Once you have connected all devices, you can also • If you have connected and activated the devices connect the Cinebar 11 and the subwoofer to the as described in this example, you must set the power supply using the enclosed power cords Cinebar 11 as follows: Make sure that the sockets are easily accessible.
(16) you can switch your AUDIO Cinebar 11 on or to standby. • If the Cinebar 11 does not receive a signal for more than 20 minutes, it will automatically switch to standby. All indicator LEDs are turned off. Subwoofer •...
Page 13
Once the search is complete, “Cinebar 11” should also appear in the list of detected devices. 5. Select Cinebar 11 from the list of detected devices. It will now function like Bluetooth earphones and emits all sound that would otherwise be played by your source device.
• S ET BT/ BT S T B Y The menu – O N: Device turns on from standby when a You can modify the settings of your Cinebar 11 with Bluetooth connection is established by a paired the menu.
Care and cleaning Clean your Cinebar 11 regularly with a soft, damp Risk of damage! microfi bre cloth. When doing so, please be absolutely Using the wrong cleaning materials may sure to observe the following instructions: damage the delicate surface of the case.
Connect subwoofer and Cinebar 11 (see page 12). The subwoofer hums. The subwoofer is connected to another Connect the subwoofer and Cinebar 11 to circuit than the rest of the system. the same circuit. The buzzing is caused by problems with Buy a line fi lter and connect both devices the power supply.
Page 20
For questions, suggestions or other issues please contact our customer service department: Lautsprecher Teufel GmbH Tel.: 00800 200 300 40 (toll-free) No liability is accepted for the accuracy BIKINI Berlin Fax: +49 (0)30 - 300 930 930 of this information. Technical changes, Budapester Strasse 44 www.teufelaudio .com...