Table of Contents
Advertisement
C
3: B
16
HAPTER
Windows
If you are using a Windows-based computer, use the
following procedure to change your TCP/IP settings:
1 From the desktop, click Start, and select Settings,
Control Panel, and Network.
2 From the Network control panel, select TCP/IP.
3 From the TCP/IP dialog box, select IP Address.
4 Select "Obtain an IP address automatically."
5 Click OK, and OK again.
6 Restart your computer.
Macintosh
If you are using a Macintosh computer, use the following
procedure to change your TCP/IP settings:
1 From the desktop, select Apple Menu, Control Panels,
and TCP/IP .
2 In the TCP/IP control panel, set Connect Via: to
"Ethernet."
The Connect Via: drop-down list is generated by clicking
the up or down arrows. From the list, select "Ethernet."
3 In the TCP/IP control panel, set Configure: to "Using
DHCP Server."
The Configure: drop-down list operates in the same way
as the Connect Via: list.
4 Close the TCP/IP dialog box, and save your changes.
5 Restart your computer.
I
ASIC
NSTALLATION
Advertisement
Table of Contents
Need help?
Do you have a question about the HomeConnect 3CRWE50194 and is the answer not in the manual?
Questions and answers