Rearward-Facing Installation Using Isogo - Safety 1st Summit ISO 30 Manual

Rearward Facing Installation Using ISOGO
1. Remove ISOGO latches from stowage bag
location.
2. Seat seat to position 4 (full recline)
for rearward-facing.
3. Place restraint facing rearwards on back
seat of vehicle in line with a top tether strap
anchorage point.
4. Locate low anchorage points. You can find
this by looking for the ISOFIX logo located
on the vehicle seat.
5. Attach the lower connector on both sides.
Listen for a "click!"
tip: You can move the car seat out of the way
to locate and attach the connectors, then
place back into position before tightening.
30
NEWBORN UP TO
30 MONTHS, APPROX.
CLICK!
BOTH SIDES