Displaying PDU Information
To display information specific to the PX device that you are using, such
as inlet or outlet types, trigger the Device Information dialog.
To display the PDU-specific information:
1. Choose Maintenance > Device Information.
2. Click a tab to view type-specific information. The number of available
tabs varies according to the model you purchased.
Tab
Device Information
Network
Outlets
Chapter 6: Using the Web Interface
Data
General PDU information, such as model
name, serial number, firmware version,
hardware revision, and so on.
The PDU specific network information, such
as the current networking mode, IPv4 and/or
IPv6 addresses and so on.
This tab also indicates whether the PDU is
part of an USB-cascading configuration. See
Identifying Cascaded Devices
108).
Each outlet's receptacle type, operating
voltage and rated current.
(on page
107