Chapter 6. Advanced Configuration; Installing A New Operating System; Installing The Windows 7 Operating System - Lenovo ThinkPad P70 User Manual

Hide thumbs Also See for ThinkPad P70:
Table of Contents

Advertisement

Chapter 6. Advanced configuration

This chapter provides information to help you further configure the computer:

Installing a new operating system

In some situations, you might need to install a new operating system. This topic provides instructions on how
to install a new operating system.

Installing the Windows 7 operating system

Before you start, print these instructions.
Attention: The process of installing a new operating system deletes all the data on your storage drive,
including the data that were stored in a hidden folder.
To install the Windows 7 operating system, do the following:
1. Ensure that you set the security chip to TPM 1.2. For more information, see "Setting the security chip"
on page 55.
2. Copy all the subdirectories and files in the C:\SWTOOLS directory to a removable storage device.
• The supplement files for the Windows 7 operating system are in the C:\SWTOOLS\OSFIXES directory.
• The device drivers are in the C:\SWTOOLS\DRIVERS directory.
• The preinstalled programs are in the C:\SWTOOLS\APPS directory.
3. Start the ThinkPad Setup program. See "Using the ThinkPad pointing device" on page 22.
4. Select Startup ➙ Boot to display the Boot Priority Order submenu.
5. Select the drive that contains the operating system installation program, for example, USB HDD. Then
press Esc.
6. Select Startup ➙ UEFI/Legacy Boot. Then do one of the following:
• To install the Windows 7 (32-bit) operating system, select Legacy Only or Both.
• To install the Windows 7 (64-bit) operating system in Legacy mode, select Legacy Only.
• To install the Windows 7 (64-bit) operating system in UEFI mode, select UEFI Only.
Note: For computers that support RAID, you can install the Windows 7 operating system onto the drive
only in UEFI mode. In this case, ensure that you always select UEFI Only.
7. Press F10 to exit the ThinkPad Setup program.
8. Connect the external DVD drive to the computer and insert the Windows 7 operating system installation
DVD into the drive, and restart the computer.
Notes:
• If you are starting the installation DVD image from an external USB device or if your computer has a
non-volatile memory (NVM) Express drive installed, do additional configurations before you start. For
more information, go to
• If an NVM Express drive is installed, additional drivers also are required. For more information, go to
https://support.microsoft.com/en-us/kb/2990941
9. Restore the C:\SWTOOLS directory that you backed up before installing the Windows 7 operating system.
10. Install the device drivers. See "Installing device drivers" on page 63.
© Copyright Lenovo 2015, 2017
http://www.lenovo.com/support/installwin7viausb3
.
.
61

Advertisement

Table of Contents
loading

Table of Contents