Scope Of Supply Chain Set - DEMAG DC-Com 1 Operating Instructions Manual

8.5.5.5

Scope of supply chain set

On reaching the permissible limit of chain wear the chain set must be replaced (for determining the wear limit of the
chain, ⇒ "Checking the hoist chain", Page 79.
When a new RDC standard chain is ordered, a chain set is always supplied.
The chain set includes the following parts:
● Chain,
● Sprocket wheel,
● Chain guide with plate and cap,
● Chain guide plate,
● Buffers for upper and lower hook position,
● Demag chain grease tube,
● Retaining ring.
The chain guide is pre-assembled, the chain is already fitted in the chain guide.
82