Operating Conditions - DEMAG DC-Com 1 Operating Instructions Manual

3.9

Operating conditions

CAUTION
Operating safety at risk
Safe operation is only possible at the specified operating conditions. In the case of other operating conditions please
contact the manufacturer ⇒ "After-sales service", Page 10
The chain hoist and the trolley can be operated at:
Ambient temperature:
Humidity:
Height:
Type of enclosure:
Electromagnetic compatibility:
Tab. 19
Demag chain hoists operating outdoors should be provided with a canopy against the weather. Chain hoists, trolley
and travel drive should be kept under shelter if they are not used for a considerable length of time.
Special operating conditions may be agreed with the manufacturer in individual cases. However, in this case we
recommend that the DC-Pro chain hoist be used.
Such operating conditions may occur for the following applications, for example:
● galvanizing or electroplating plants,
● hygiene areas,
● low-temperature or hot applications.
On request, suitable optimised equipment and important information for safe, low-wear operation may be supplied
for these applications.
Under certain ambient conditions, application of re-inforced switch-off springs is required:
● DC1-10 reeving 1/1 hook assembly - Use of switch-off springs (optional)
● for very high mechanical demands on the buffers, e.g. frequent contact with sharp edges,
● for extreme ambient conditions (hot atmospheres, foundries, etc.).
● DK10 bottom block with external switch-off springs (optional)
● for extreme ambient conditions (hot atmospheres, foundries, etc.).
28
-20 °C to +40 °C,
max. 80 % relative humidity,
up to 1000 m above sea level,
Resistance to interference in industrial environments,
Interference emissions for residential, commercial and light-industrial environ‐
IP55,
ments.