Subaru STARLINK Manual page 71

UPDATE DOWNLOAD
1.
Connect to a Wi-Fi network. (→P.68)
2.
Display the general settings screen. (→P.62)
3.
Select
● If
Check for Updates) is on at the general settings
screen, an update
automatically before proceeding to the next step.
● If
Download Updates) is on at the general settings
screen, the software update will be downloaded
automatically before
INSTALLATION".
4.
Select
download (if an update is available).
● (Later): Select to stop the update process.
● The download status progress is displayed in the
upper right of the screen.
(Check for Updates).
(Automatically
check will be performed
(Automatically
proceeding to "UPDATE
(Download Now) to begin the
UPDATE INSTALLATION
CAUTION
l Park your vehicle in a safe place when installing the update.
l The following system functions are restricted during the
update installation.
• It will not be possible to use general system functions.
• Only the rear view camera image will be displayed. Or the
image will disappear temporarily.
1.
Complete the "UPDATE DOWNLOAD" process.
2.
Select (Install Now) to start the installation.
● (Cancel): Select to stop the installation
Cancel
process.
● The installation process will take several minutes.
3.
When the installation is complete, select
Agree) on the confirmation message to complete the
update process.
● By selecting this switch, the system will restart
automatically.
OTHER SETTINGS
3
I Agree
(I
71