Subaru STARLINK Manual page 59

AUTO CONNECTION MODE
Leave the Bluetooth phone/device in a location where the
connection can be established.
● When the ignition switch is in the "ACC" or "ON"
position, the system searches for a nearby registered
Bluetooth phone/device.
● The system will connect with the registered Bluetooth
phone/device that was last connected, if it is nearby.
CONNECTING MANUALLY
When the auto connection has failed, it is necessary to
connect Bluetooth phones/devices manually.
1.
Press , and then select
2.
Select (Phone).
Phone
3.
Follow the steps
DISCONNECTING Bluetooth PHONE/DEVICE" from
"STEP 2". (→P.58)
Settings (Settings).
in "CONNECTING OR
RECONNECTING THE Bluetooth PHONE/DEVICE
If a Bluetooth phone/device is disconnected due to poor
reception from the Bluetooth network when the ignition
switch is turned to the "ACC" or "ON" position, the system
automatically reconnect the Bluetooth phone/device.
● If a Bluetooth phone/device is disconnected on
purpose, such as turning it off, this does not happen.
Reconnect the Bluetooth phone/device manually.
Bluetooth SETTINGS
®
3
59